OnePower Pro Series UPS - new uninterruptible power supply line is launched.
On-Line type UPS of increased reliability, with an output power factor equal to unity and a set of energy saving functions.
UPS of OnePower Pro series provide reliable protection of critical equipment and facilities from power quality disturbances in the AC network.
The use of modern circuitry solutions allows OnePower Pro series UPS to provide a high degree of protection for both industrial equipment and household equipment.
The output power factor is set to unity. The UPS has the same power rating for both active and non-linear or mixed loads.
The powerful intelligent programmable charger allows you to connect to a UPS and quickly charge an external heavy supply battery.
High resistance to overvoltage effect allows the UPS to operate in normal mode during sudden increases in the mains voltage without additional protection devices.
Double conversion of power. Absence of interruptions in the output voltage when switching from standby to stand-alone operation and vice versa.
Stabilization of output voltage parameters in a wide range of network parameters. This provides a stable power supply to the load and a reduction in the number of charge-discharge cycles of the battery, thereby conserving it's service life.
The output voltage waveform is a pure sinewave, which makes it possible to connect loads that are sensitive to the waveform of the supply voltage to the UPS.
Energy saving function. Within the user-specified voltage range, the UPS operates on a bypass circuit with up to 96% efficiency, thereby increasing energy efficiency.
Increased working time for the most responsible consumers. UPS has a controlled output for connecting peripheral equipment. The operating time of the output during stand-alone operation is limited by the user and therefore increasing the operating time of responsible consumers.
The high overload capacity allows the OnePower Pro UPS to handle loads with higher starting currents.
Increased input and output power factors. This makes the UPS most energy efficient and ensures efficient operation with all types of loads.
The UPS can be equipped with integrated protection devices that provide additional protection against voltage surges up to 440 V and lightning protection of class II.
General-purpose design that can be mounted in both industrial 19 ”rack and vertical installation on a horizontal surface using a set of supports.
Long run time. UPS of ATS xxxx R-E versions is designed for operation with battery modules BP (E), which can be connected in parallel,or with external storage batteries. The UPS has a built-in high-power charger, and also has the ability to connect an additional external high-power charger CHR, which allows you to connect a large-capacity battery or parallel connection of several battery modules, thereby providing the possibility of continuous operation in stand-alone operation during long interruptions in the electric line voltage.
UPS of ATS xxxx R-BE version has built-in rechargeable batteries and are also designed to work with BP (E) battery modules, which are connected in parallel. The UPS has a built-in high-power charger, and also has the ability to connect an additional external high-power CHR charger, which allows you to connect a large number of battery modules, thereby providing the possibility of continuous operation in stand-alone operation during long interruptions in the mains voltage.
For convenient and compact placement of batteries, ATC-CONVERS OOO offers you BC-8, BC-12, BC-16 battery cabinets. We also would like to offer you rechargeable batteries, that are perfect for working with our uninterruptible power supplies and can be installed in residential areas since they do not require maintenance during operation.
Remote control and management via the RS-232 or USB serial port using UPS Agent software, via the AS / 400 relay interface using the AS / 400 "AS/400 RX", as well as monitoring and management in Internet / Intranet networks via protocols HTTP and SNMP using WEB / SNMP-adapter WEB / SNMP-adapter WEBtel II ES AUX with integrated WEB-server.
Please note that WEB/SNMP adapter "WEBtel II ES AUX" or the AS / 400 interface board "AS/400 R-X" are not included in the UPS and can be ordered additionally!
WEBtel II ES AUX allows you to additionally connect:
- AS/400 interface module "MRS-4" for simultaneous UPS monitoring and control via AS / 400 interface and via HTTP/SNMP protocols in Internet/Intranet networks;
- discrete input module "MDS-4", which allows monitoring the status of up to four discrete sensors;
- digital sensors of humidity and ambient temperature TS-100D and HTS-100D.
